INSE E3 PLUS, Руководство пользователя

Страница: 11 / 19

9
Product Operation
2. Start/Pause/Hibernation
Sleep mode: The light of “Cleaning” button of machine is off, and the
machine is in a static state.
Standby mode: The light of "Cleaning" button of machine is always on, and
the machine is in a static state.
Working mode: The machine is working, and the light of the "Cleaning"
button is always on.
1>. Start
Press and hold the "Cleaning" button of the machine for 3 seconds, and the
machine light will turn on.
! Note:
If the machine is in sleep mode, press the "Clean" button on the host or the
"Start/Pause" button on the remote control to switch the machine from sleep
mode to standby mode, and then press the "Clean" button on the host or
"Start/Pause" on the remote control again, then the machine will start to
work.
2>. Pause
Pause means to switch the machine from working mode to standby mode,
which can be completed by the following operations:
A. Press the remote control start/pause button.
B. Press the "Clean" button on the host.
4>. Automatic charging
A. When the battery level is too low, the machine will automatically start
looking for a charging dock to charge.
B. Please make sure that the charging base is in a power-on state and there
are as few obstacles as possible, otherwise the machine cannot find the
charging base for charging.
C. In order to find the most suitable charging location, the machine may go
back and forth to the charging base 3~4 times before it can be charged
normally.