Inscape Data LinkPower LPS1800 Series Скачать руководство пользователя страница 2

Страница: 2 / 59

Page

Revision 1.0

Certification

Inscape Data Corporation certifies that this product met its published specifications at time of shipment

from the factory.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his own expense.

The user is cautioned that changes and modifications made to the equipment without approval of the

manufacturer could void the user's authority to operate this equipment.

The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user’s authority to operate the

equipment.

Industry Canada Statement

This Class A digital apparatus complies with Canadian ICES-003.

CE Statement

This product complies with the European Low Voltage Directive 73/23/EEC and EMC Directive

89/336/EEC as amended by European Directive 93/68/EEC.

Warning: This is a class B product. In a domestic environment this product may cause radio

interference in which case the user may be required to take adequate measures.

Содержание LinkPower LPS1800 Series




























































Результаты поиска

Содержание LinkPower LPS1800 Series

Отзывы:

Бренды по названию

Популярные бренды

Inscape Data LinkPower LPS1800 Series, Руководство пользователя

Результаты поиска

Содержание LinkPower LPS1800 Series

Отзывы:

Бренды по названию

Популярные бренды