Inscape Data Link Power LPS3800-T1 Series, Руководство пользователя

Страница: 9 / 15

Page | 9
Grounding Protection:
The system provides the following way to ground the equipment for safety and protection of the system. It is
highly recommended that you’re to perform both grounding procedures for maximum safety and protection of
your equipment. However, at least of the grounding MUST be performed, otherwise any product damage caused
by improper or no grounding will not be covered under warranty.
Grounding the Switch by Using the AC Power Cord
If the installation site has no grounding strips or earth ground connection, then you must ground the switch
through the AC wire of the power cord. Please make sure that:
1. The power cord extension has a PE (Protective Earth) terminal, Figure 5, Aka, Equipment Grounding
Conductor.
2. The ground contact in the power outlet is securely connected to the ground in the power distribution
room or on the AC transformer side.
3. The power cord is securely connected to the power outlet.
4. If the ground contact in the power outlet is not connected to the ground, report and resolve the problem
and reconstruct the grounding system.
NOTE:
P
RODUCT DAMAGE CAUSED BY IMPROPER OR NO GROUNDING WILL NOT BE COVERED UNDER WARRANTY
!
6 FT AC Power Cord:
• White (W) – AC/L
•
Green (G) – Ground
•
Black (B) – AC/N
AC Power Cable:
1. White (W) – AC/N
2. Green (G) – Ground
3.
Black (B) – AC/L
3-Terminal AC Connector Set
DC Power Cable (Optional):
1. White (W) – Positive
2. Green (G) – Ground
3.
Black (B) – Negative
4-Terminal DC Connector Set
Figure 5 GREEN COLOR WIRE of the AC/DC Power Cords Is Used for Grounding