NVS440R User’s Guide
-
-
-
- 28
28
28
28 -
-
-
-
"
Time Setup
-
Current Time
:
It displays the current time of NVS440R.
-
Time Settings
: Options for setting the ti
me manually or synchronize to the PC.
Options
Description
“Synchronize With Computer Time”
Synchronize the time with the PC time.
“Set Manually”
You can manually set the time.
5.5. Sensor & Capture Setup
This is the setup page for conditions of video capture. The video capture can be triggered either by activated
alarm sensor or motion detection as setup by this page. When the sensor is triggered the event is ported to the
NVR100 Software. Captured video of the event can be stored on the HDD of the NVS440R.
Figure 5-7. Sensor & Capture Setup
"
Sensor Setup
: Up to 4 external sensors can be connected to the NVS440R.
-
Type Selection
: Select sensor type. There are two sensor operating mode.
.
Normal Open
: Open circuit in normal operation. Closed circuit indicates alarm triggered condition.
.
Normal Close
: Closed circuit in normal operation. Open circuit indicates alarm triggered condition.
"
Video Capture Condition
: It sets which sensor will trigger video recording for channels 1-4. The NVS440R
supports 2 types of sensor event trigger.
1. Sensor : when at least one of the sensor detects a trigger event.
