NVS440R User’s Guide
-
-
-
- 2
2
2
2 -
-
-
-
Note
This equipment has been manufactured and tested to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures :
!
Reorient or relocate the receiving antenna.
!
Increase the distance between the video equipment and receiver equipment in
question.
!
Connect the video equipment into a power outlet on a circuit different than the
receiver equipment in question. Reorient or relocate the receiving antenna.
!
Consult the dealer or an experienced radio/TV technician for help.
Directions
NVS440 is designed for indoor use only. When using NVS440R outdoors or in an environment that
exceeds the limited range, you must separately use a water-resistant case.
Be careful not to cause any physical damage by dropping or throwing the NVS440R A/V Server.
Especially keep the A/V server out of reach from children.
Do not disassemble NVS440R. You will be excluded from After Service when disassembled.
Use only the power adapter provided with the NVS440R.
If you would like to use the NVS440R A/V server for security, monitoring, please check the legal
regulations within the country.
