NVC210
User’s Guide
Rev.1.2 (Aug. 2009)
33
33
33
33 of 56
of 56
of 56
of 56
Sensor
Select
Check to enable Sensor initiated capture.
Motion
Detection
Select
Check to enable motion detection initiated capture.
Select a way of sending captured video. You can send captured
video through FTP or E-mail, or both.
-
By E-Mail
Check to send captured video by e-mail.
E-mail is sent to the
Recv E-mail address.
Refer to
[Section
5.3.]
Captured video data for E-mail consists of intra frames only in
consideration of the limited storage space for E-mail account.
FTP data contains entire video frames.
Captured
Video
Transmission
By FTP
Check to send captured video by FTP.
FTP is sent to the
FTP
Server. Refer to
[Section 5.3.]
If the FTP server is not properly assigned in “
Network
Configuration” mode
, NVC210 ignores the video transmission
by FTP
SAVE
Save the setup parameters.
