PARAMETERS
To set the parameters it is necessary to enter a secure menu. This is done by entering
a password number when requested.
To enter the parameter menus press the TARE key during the initial counting of the
display after power turned on. The Weight Display will show "PIn " requesting the
password number to be entered.
The default password is "0000" but other numbers can be set using the parameter
menus.
Press the "O" key four times. The display will show "PIn- - - -", Press the TARE key.
The Parameter menu has 7 functions that can be accessed using the Unit Wt. key
(Lb/kg key on TFCa series) to cycle through the choices. The Weight Display will
show the name of the functions. To enter a function press the TARE key. At any time
press the ZERO key to return to weighing.
Weight
Display
Description
F1 CAL
See the calibration section for details
F2 dI
Set the scale increment. Press the Unit Wt. key to show the options.
Press the TARE key to accept the selection.
F3 dEC
Select Decimal point position, 0.00 or 0.000 by pressing the Unit Wt.
key.
F4 CAP
Select the scale capacity.
F5 Cnt
Displays the A/D counts. Press the TARE key to return to menu.
F6 PIn
Set a new password number. Display will show "P1 "
Enter the new password number then press the TARE key.
Display will change to "P2 ", Enter the password again and press the
TARE key again.
The display will show "donE" to show the new password has been
accepted.
Record the new password number in a secure place.
F7 Prt
Press the Unit Wt. key to show the options. Select "Prnt" to have the
scale print when the PRINT key is pressed. Or select "P Cont" to print
continuously.
.
