Inscale IN301, Руководство оператора, Страница: 6 / 12

© Inscale 2000
4
CONFIGURATION
The printer is set with the dip-switches under the paper roll, see drawing on page 3.
When configured as a statistics printer it will work with the Inscale balances only.
The data from the balances will be collected and statistical information on the readings
from the balance can be printed. The data and time can also be printed with the data.
When the printer is set for standard printing it can be used with most RS-232 devices to
print the data from them. The data and time are not available.
To reset the parameters turn the printer off. Set the switches as desired and then turn
the printer on.
With SW8 Off With SW8 On*
Statistics disabled Statistics enabled
1200 2400 4800 9600 baud Select
Inscale
Balances*
SW1 on off on off Off
SW2 on on off off Off
SW3 On 8 bit data not used
Off 7 bit data
SW4 On Check Parity Increment number*
Off No Parity check Do not print number
SW5 On Parity Even Data/time enabled*
Off Parity Odd Data/Time not printed
SW6 On 80 column Print all statistics*
Off 40 column Print only number of readings
and total
SW7 On High Quality Print (slow) High Quality Print (slow)
Off Normal Print (fast) Normal Print (fast)*
*The default settings are:
Operate with
Inscale
balances for statistics
4800 baud Date and time enabled 40 column
8 bit Line numbering enabled
no parity Fast printing enabled