Insane Audio JK4001, Руководство по установке

Страница: 10 / 18

Installing the JK4001
If you
DO
have the OEM Alpine Premium Sound
System, you will need to swap the speaker quick
connect wires shown in the picture.
Connect F2 to R1 and R2 to F1.
Before proceeding with the installation, vehicles with
the OEM Alpine Premium Sound System will need to
make a minor change on the main wiring harness.
NOTE: FOR VEHICLES THAT HAVE
THE ALPINE PREMIUM SOUND
SYSTEM
Main Power Wire Harness
For OEM Alpine Premium Sound System:
NOTE: If your vehicle is not equipped with the OEM
Alpine Premium Sound System or if you are using your
own aftermarket amps and speakers you do not have to
make any changes. F2 should be connected to F1
and R2 should be connected to R1 as shown in picture.
F2 - F1 Connection (Labeled)
R2 - R1 Connection (Labeled)
CAUTION