Menu Operations
31
4.6
Satellite Guide
When you enter “Satellite Guide” menu,
you will see the screen like beside:
Here you can enter your local longitude and
latitude and the satellite’s longitude. The
receiver
calculates
the
antenna’s
orientation and elevation to point your
antenna to the selected satellite.
1.
Use the [Number] buttons to input the
values of “Local Longitude”, “Local
Latitude” and “Satellite Longitude”.
2.
In the “Calculate” item press [OK], the receiver auto calculates the
antenna’s orientation and elevation to point your antenna to the selected
satellite.
3.
Press [Menu / Exit] to return to the previous menu.
4.7
Unicable Configuration
Here you have two way to detect the frequency of Unicable LNB:
1.
Tuner: press [Vol◄/►] to tuner 1 or tuner 2.
2.
Manual Config: Press [OK] and you will see below menu.
Here you need to know the IF Channel and IF Frequency of the Unicable
LNB you are using, then press [Vol◄/►] to choose the IF Channel and IF
Frequency accordingly, then press “exit” for saving data.
3.
Auto Config: just press [OK], and you will see below window,
after the
massage disppear, press [Vol◄/►] to choose the frequency, then "exit".
4.
Installation
Single search
LNB Configuration
LNB type
Settings must be as below:
LNB type: Unicable
First Frequency: 9750MHz (press [Vol◄/►]
to choose)
Sencond Frequency: 10600MHz. (press
[Vol◄/►] to choose)
Save all above settings, and back to
“Single Search” menu, and start to search.
