Menu Operations
25
3.
Load Default Timer Setting
When you enter “Load Default Timer
Setting”, you will see the window like right:
Press [OK] key on “Load
Default Timer Setting”, it will show
“Input Password” dialogue.
After you input the correct
password,
there
will
show
a
warning message to inquiry you
“All
Timers
will
be
cleared,
continue?”
If you select “Yes”, it will clear all the timer.
You can press [Exit] key to exit.
6.6
OSD Setting
When you enter to “OSD Setting” menu,
you will see a screen like right:
1.
Subtitle Display: You can press [◄/►]
key to select “On” or “Off”. If the
current
channel
has
subtitle
information, it will be showed up while
this function is “On”. If this function is
“Off”, there won’t show up subtitle
information even if the current channel has subtitle information.
2.
OSD Timeout: When you switch channels in full screen, there will show up
some information about current channel on the lower of the screen. And
regarding to the duration of these information show up on the screen, you
can press [◄/►] key to switch the time. The range of the duration is “1
second ~ 10seconds”.
3.
OSD Transparency: Besides the setting of “OSD Menu Style”, you also can
set the transparency of OSD. You can press [◄/►] key to select the values.
There are 9 levels of transparency, 10%, 20%, 30%, 40% 50%, 60%, 70%,
80% and Off (means no transparency function).
