INOXPA VEEVALV, Инструкции по установке, обслуживанию и техническому обслуживанию

Страница: 5 / 28

4 1.Safety 2021/12
The valve contains components which have linear movement. Do not place hands or fingers in
the valve closure area as this may cause serious injury.
1.4.3. During maintenance
The Technical Specifications of Chapter 8 should always be observed.
NEVER disassemble the valve until the pipes have been emptied. Bear in mind that the liquid
in the pipe may be dangerous or extremely hot. Consult the regulations in effect in each
country for these cases.
Do not leave parts loose on the floor.
All electrical work should be carried out by authorized personnel.
1.4.4. Compliance with the instructions.
Any non-compliance with the instructions may result in a risk for the operators, the environment and the machine, and
may lead to a loss of your right to claim damages.
This non-compliance may result in the following risks:
• Failure of important functions of the machine/plant.
• Failure of specific maintenance and repair procedures.
• Possibility of electric, mechanical and chemical risks.
• Will place the environment in danger due to the release of substances.
1.5.
GUARANTEE.
Any guarantee will be cancelled immediately and as a matter of law and, in addition, we will require compensation for
any claims of civil liability presented by third parties, in case:
• The installation and maintenance work has not been carried out according to the instructions of this manual.
• The repairs are not carried out by our personnel or have been carried out without our written authorization.
• The parts used are not INOXPA genuine parts.
•
Modifications have been carried out on our materials without written authorization.
• The material has been badly used, incorrectly used, or used with negligence or has not been used according to
the indications and intended use specified in this manual.
The general conditions of delivery already in your possession are also applicable.
No change can be made to the equipment without prior discussion with the manufacturer. For
your safety, please use original spare parts and accessories.
The use of other parts will exempt the manufacturer from any liability.
The service terms can only be changed with prior written authorization from INOXPA.
Please do not hesitate to contact us in case of doubts or more complete explanations are required on specific data
(adjustments, assembly, disassembly, etc.).