For more information on the pressurization tank (installation, performance, maintenance, etc.), refer
to the instruction manual supplied by the manufacturer.
01.030.32.0009
Mechanical seal
5.8. ELECTRICAL INSTALLATION
Only qualified personnel can connect the electric motors.
Take the necessary measures to prevent damage to cables and connections.
Electrical equipment, terminals and components of the control systems may still carry
current when they are disconnected. Contacting them may impose a hazard to operators
or cause irreparable material damage.
Before handling the pump, make sure that the motor is stopped.
To do the electrical installation:
- connect the motor in accordance with the instructions supplied by the motor manufacturer, in
accordance with the current national legislation and in compliance with EN 60204-1,
01.031.32.0004
-
check the direction of rotation (see the signalling label on the pump),
- start and stop the pump motor momentarily. Make sure that the direction of rotation is correct.
If the pump rotates in the wrong direction it could cause serious damage.
See indicator label on the pump.
ALWAYS check the direction of rotation of the motor with liquid inside the pump.
ATTENTION
Installation
INOXPA S.A.U.
01.031.30.03EN · (A) 2022/01
12
