Maintenance
INOXPA S.A.U.
·
01.610.30.11EN · (0) 2021/05
23
Assembly
•
Insert the inner ring of the bearings (70) into the pump shaft (05) to the stop.
•
Insert the spacer bushing (17), the roller bearing (70A) and the stop washer (31A), and fasten it all with the
elastic ring (66).
•
Place outer ring together with the bearing rollers (70) into the housing in the support (06).
•
Mount the shaft-bearings assembly into the support of the bearing (06).
•
Place the seal (88).
•
Mount the bearings cover (12) with the seal (88A) inside it using the allen screws (51).
0
1
.6
1
0
.3
2
.0
0
1
9
