INOW WIFI, Руководство пользователя, Страница: 2 / 11

Before you begin installation, setup or operation of the unit, please read all of these instructions
carefully.
Safety & Warnings

Electric Towel Rails must be installed by a licensed electrician in accordance with the
current IEE wiring regulations.

The product should be permanently fixed and connected to the 220/240 Volt AC mains
power supply via a fused spur/cable outlet, and earth bonded .

This product is a Class 1 unit and as a result it must be earth connected.

The element must NEVER be used without the towel rail or radiator being filled with
water or fluid at correct fluid level.

Only use the device in a suitable towel rail or radiator, for space heating and/or towel
drying.

This element should be mounted vertically and horizontally when it is filled with fluid
inside the towel warmers or radiators.

It is imperative that you have the correct fluid level( 90% fluid of towel rail or radiator
total volume is recommended) in the towel rail before the element is used.

A Never attempt to disconnect the control unit from the heating element. It is a unit that
was factory-sealed.

Ensure the O-ring is on the connection part before installation. This o-ring is preventing
the leakage after installation.

The appliance is not a toy for children.

The unit is not to be used by persons (including children) with reduced physical, sensory
or mental capabilities, only use if they are supervised by a competent person.
Warning!
Never tighten using the housing itself, Always use the correct tools (Spanner).