7.10.18 07014C © Inovonics, 2018
3
6 Regulatory Compliance
6.1 Television and Radio Interference
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
6.2 FCC Part 15 and Industry Canada Compliance
This device complies with part 15 of the FCC Rules and Industry Canada
license-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables
aux appareils radio exempts de licence. L'exploitation est autorisée aux
deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage,
et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
6.3 Wi-Fi and Bluetooth Module
This device includes an LSR Sterling-LWB module (FCC ID: TFB-1003 / IC
ID: 5969A-1003) and an LSR FlexNotch 2 dBi Antenna, PN 001-0015.
The FCC requires the user to be notified that any changes or modifications
made to this device that are not expressly approved by LSR may void the
user’s authority to operate the equipment.
To comply with FCC and Industry Canada RF exposure limits for general
population / uncontrolled expose, the antenna(s) used for this transmitter
must be installed to provide a separation distance of at least 29mm from all
persons and operating in conjunction with any other antenna or transmitter,
except in accordance with FCC multi-transmitter product procedures.
7 Open Source Software Notice and Information
To obtain the source code under GPL, LGPL, MPL, and other open source
licenses that is contained in this product, please contact Inovonics
technical services. In addition to the source code, all referred license terms,
warranty disclaimers and copyright notices are also available.