Inovonics JUSTIN 808 Скачать руководство пользователя страница 13

Страница: 13 / 49

— 11 —

Section III

QUICK-START SETUP

This manual contains detailed and complete information re-

garding installation and operation of the JUSTIN 808. In the in-

terest of getting the unit on-air quickly, however, following the

simple steps given in this Quick-Start Setup section will get the

tech-savvy user up and running in the shortest possible time.

We do, nevertheless, strongly recommend consulting the full

text of the manual for explanation and guidance through any

setup irregularities, and to introduce the many operational fea-

tures that are available but not included in this Quick-Start sec-

tion.

CONSIDERATIONS

Preferred

Installation

in the

HD1 Airchain

Two basic installation modes are available to you. The

pre-

ferred mode

places the JUSTIN 808 in the HD1 airchain. In this

mode, slightly more ‘diversity delay’ is purposely programmed

into the FM audio path, and the JUSTIN 808 then provides vari-

able delay of the HD1 program audio to maintain time align-

ment. The advantage of this mode is that the JUSTIN 808 can

also do whatever small amount of audio level correction may

be necessary to give FM and HD the same apparent loudness

when the receiver fades between reception modes.

Alternate

Installation

in the Analog

FM Airchain

The

alternative installation

places the JUSTIN 808 in the FM

airchain, where it can provide all or part of the 8+ seconds of

diversity delay, adjusting overall delay as required to keep FM

in sync with HD. The disadvantage here is that level correction

is not possible.

Navigating

the Menus

Turn

the front-panel knob to navigate through the JUSTIN 808

menus.

Push

the knob to enter a setup menu,

push

again to get

into any required sub-menu, and then

turn

the knob to make a

selection. Finally

push

once more to commit that selection to

memory. Use the

BACK

button to return to a previous menu

and, ultimately, to the Main Menu.

De-Emphasis

Analog FM program de-emphasis is determined by broadcast

operating regions. North America utilizes a 75-microsecond

characteristic; Europe and much of the rest of the world has

standardized on 50 microseconds.

JUSTIN 808 de-emphasis is set under

Setup

De-Emphasis

Check that the setting is appropriate for your area:

50us

75us

Содержание JUSTIN 808


















































Результаты поиска

Содержание JUSTIN 808

Отзывы:

Похожие инструкции для JUSTIN 808

Бренды по названию

Популярные бренды

Inovonics JUSTIN 808, Инструкция по установке и эксплуатации

Результаты поиска

Содержание JUSTIN 808

Отзывы:

Похожие инструкции для JUSTIN 808

Бренды по названию

Популярные бренды