4.2.20 357-05818-01 Rev A © Inovonics, 2020 - www.inovonics.com
6
4.
When L
ANGUAGE
S
ELECTED
displays, press
Enter
to return to the
I
NSTALL
& S
ERVICE
menu.
To reset the language selection:
1.
Press the
Up
and
Enter
keys while cycling the power.
2.
The S
ELECT
L
ANGUAGE
prompt displays. Follow the steps above to
choose a new language.
Change Password
Passwords can be up to eight digits long. The default authorized user
password is 1234; the default authorized installer password is 3446. To
change the password:
1.
From the I
NSTALL
& S
ERVICE
menu, press
Enter
at the C
HANGE
P
ASSWORD
prompt.
2.
Use the
Up
/
Down
buttons to choose either U
SER
P
ASSWORD
or I
NSTALL
P
ASSWORD
; press
Enter
to select.
3.
Use the
Up
/
Down
buttons to scroll through the digits; press
Enter
to
select and advance to the next digit.
Note:
Choosing a null as the password will disable the function, allowing
users to perform receiver functions and/or change parameters without a
password.
4.
When finished, press
Enter
again to complete selection.
5.
When P
ASSWORD
C
HANGED
displays, press
Enter
to return to the
I
NSTALL
& S
ERVICE
menu.
Caution:
Store the new password in a secure place. If the new password is
lost, you will not be able to access the receiver without restoring it to factory
defaults as described in section , “Factory Config” on page 5.
Signal Strength
The S
IGNAL
S
TRENGTH
option is used to measure signal strength and
troubleshoot installation problems.
1.
At the S
IGNAL
S
TRENGTH
prompt, press
Enter
.
• The first programmed point displays, along with a signal quality of
G
OOD
, W
EAK
or N
O
S
IG
.
Note:
The point must have an active transmitter associated with it to
display signal strength.
2.
Use the
Up
/
Down
buttons to scroll through the registered transmitters.
3.
Press
Enter
to view Level (LV) and Margin (MA).
• LV indicates the overall signal strength; MA indicates the signal
strength minus the background noise.
Delete Point
The D
ELETE
P
OINT
option allows you to delete transmitter registration
information from all registered points, or from a specific point. Programmed
point information is not deleted; just the registration identification number
associated with the transmitters or repeaters. To delete points:
1.
From the I
NSTALL
& S
ERVICE
menu, use the
Up
and Down buttons to
navigate to the D
ELETE
P
OINT
prompt; press the
Enter
button.
2.
The D
ELETE
A
LL
? prompt displays. Use the
Up
and
Down
buttons to
choose N for no or Y for yes; press
Enter
to select.
3.
If you selected no, the D
ELETE
P
OINT
prompt displays. Use the
Up
and
Down
buttons to choose a point to delete; press
Enter
to select.
4.
Press the
Enter
button. If there is more than one registered point, then
pressing the
Enter
button returns to point selection for deletion; if there
are no more registered points, the display returns to the I
NSTALL
&
S
ERVICE
menu.
Register Transmitter
The R
EGISTER
X
MITTER
option allows you to register a transmitter or
repeater.
1.
From the I
NSTALL
& S
ERVICE
menu, use the
Up
and Down buttons to
navigate to the R
EGISTER
X
MITTER
prompt; press the
Enter
button.
2.
Use the
Up
and
Down
buttons to choose the point to which you want to
register the transmitter/repeater.
3.
Use the
Up
and
Down
buttons to toggle between N for no and Y for yes
to choose whether or not you wish to register a transmitter/repeater to
the point; press
Enter
to select.
4.
Press the transmitter/repeater’s
Reset
button at the R
ESET
X
MITTER
prompt.
6.3 Event Log
The event log displays the last 50 events that have occurred, whether they
be alarms, restorals or tamper, inactive, or low battery faults. Event log
information is available without a password.
1.
From system status information, press
Enter
.
2.
Use the
Up
or
Down
buttons to navigate to E
VENT
L
OG
; press the
Enter
button.
3.
Use the
Up
/
Down
buttons to scroll through events.
4.
When viewing transmitter events, press
Enter
to see the output the
events map to.
Note:
No output will be displayed if the event is mapped to a null output.
7 Specifications
Dimensions: 22cm x 18cm x 4cm (8.75" x 7" x 1.63").
Weight: 522 g (18.4 oz).
Operating environment: -10°- 60°C (14°- 140°F), 90% relative humidity,
non-condensing.
Power requirement: 11-14 VDC; 500mA.
Nominal current consumption: Approx. 120 mA.
Output specifications: Form C relay 1A @ 28 VDC, 0.5 @ 30 VAC resistive
load.
Input specifications: Reset input: Contact closure, momentary low.
Receiver type: Frequency hopping spread spectrum.
Operating frequency: 868-869 MHz.
Tamper: Type B, fixed device.
Number of points/Transmitters: 32.
Number of outputs: 12 Form C relay outputs.
Event history log capacity: 50 events (first-in, first-out replacement).
Output power: N/A.
Firmware revision: 90595, v1.3.
Countries in which Inovonics European products can be distributed:
Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Greece, Hungary, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, United Kingdom.
Note:
Specifications and data are subject to change without notice.
Note:
Changes or modifications to this unit not expressly approved by
Inovonics may void the installer's authority to operate the equipment as
well as the product warranty.
8 Simplified Declaration of Conformity
Hereby, Inovonics declares that the radio equipment type EE4232MR is in
compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following
Internet address: www.inovonics.com.
