4
The rainfall history bar chart displays in increments from 0.1” or 6.0”. Most of the time, the actual rainfall
reading will fall between increments. The bar chart will show the last increment that was actually reached.
For example: if the actual rainfall is 0.8”, the bar chart will show 0.5” The chart will not show 1.0” until the
actual rainfall total reaches 1.0”
More detailed daily, weekly and monthly history data are available. Press and hold the HISTORY button when
your desire corresponding history data are shown. The ”0” (current) bar will show up and the precise data will
be shown on the time display. Press UP or DOWN and you can scroll through the daily, weekly or monthly
prior data.
Note: On the bar chart display, the ”0” represents the current period.-1,-2,etc. indicate the prior periods.
G. Key MAX/MIN and Key CLEAR --- MAXIMUM And MINIMUM Records
Temperature Maximum and Minimum
The highest and lowest record of indoor temperature, outdoor temperature and rainfall are stores
automatically after you activate the base unit. You can recall the records at any time by pressing the MAX/MIN
button. With each press of the button, in sequence the display will show: indoor maximum reached, indoor
minimum reached, outdoor maximum, outdoor minimum, rainfall maximum and rainfall minimum. The
corresponding MAX or MIN icon will be display each time. To clear any maximum or minimum record, press
the CLEAR button when the appropriate record is shown on the display.
Rainfall maximum and minimum
The rainfall maximum and minimum record is a daily record, which counts from 12:00 am to 1:59 pm
everyday.
Aside from the automatic daily clear, pressing the CLEAR button when the appropriate record is shown on the
display can clear the rainfall maximum or minimum record.
Rain Collector / Remote Sensor
1) Self-emptying,
waterproof
with oversized collection area
2)
Wide base to minimize tip-over
3) Transmission
range: 100 ft.(range may be shorter based on interference present)
4)
Transmission frequency: 433 MHz
5)
Outdoor temperature range: -4°F to 140°F (-20°C to 60°C)
6)
Includes 2 stainless steel screws and 2 spikes for mounting to solid surface or ground
7)
Requires 2 X AA batteries (not included)
INSTALLATION
Locating the Base Unit and Remote Sensor
1)
Choose a suitable place for the base unit and remote outdoor sensor, within the transmission distance.
2)
Place the base unit near a window, but away from direct sunlight or sources of heat or air conditioning
Содержание PLE11
Страница 7: ...7...
