Inovalley HP32-CD, Руководство пользователя

Страница: 15 / 17

15
Failed when connect to the
Bluetooth device
To connect the Bluetooth
device properly, and make
sure it was connected
successfully.
Volume was set at 0 degree
or at Mute status.
To add the volume at the
proper degree or press the
MUTE key again on the remote
If the problem exists after checking related procedures above, please refer to the
service agent's professional technician to fix it. Do not attempt to open the back
cover, otherwise
DETAILS AND PRECAUTIONS ON THE USE OF BATTERIES
‐ Discard a used battery in nature or garbage pollutes and prevents the recovery of
recyclable materials.
It is therefore important to limit consumption of batteries and follow these guidelines:
‐
focus on alkaline batteries (that last longer than the saline batteries) and when
possible, rechargeable batteries
‐
deposit batteries and accumulators in specific containers arranged among
traders.
For example, metals will be valued and polluted the environment because they contain
heavy metals hazardous to health and the environment primarily (cadmium and nickel)
‐ The piles must installation by respecting the polarity indicated on the apparatus and
the pile.
An incorrect positioning can is to damage the apparatus, is to cause escapes on the level
of the pile, is to the extreme to cause a fire or the explosion of the pile.
‐ To ensure proper operation, the batteries must be in good condition. In case of
abnormality in the functioning of the device, put fresh batteries
‐ Never attempt to recharge non ‐ rechargeable batteries. They could run, warm up,
causing a fire or explosion.
‐ Replace all batteries at the same time. Never mix zinc batteries with alkaline batteries
or rechargeable batteries
‐ The batteries must be removed from the device