INOR ICON-X, Дополнительное руководство по инструкции

Страница: 7 / 16

INSTALLATION
2
7
INOR TRANSMITTERS
www.inor.com 07/2018 - 4006932901 - AD ICON-X ConSoft R01 en
2.4 Installation of configuration software ConSoft
All necessary software for configuration are included on the memory stick or can be downloaded
from the website of the manufacturer.
For detailed information refer to section "Installation guide for ConSoft and USB-Interface
drivers".
All software, USB drivers and installation guides can also be downloaded from the website.
2.5 Description of USB interface ICON-X
The USB interface ICON-Xis powered from the PC ´ s USB port. There are three LED indicators on
the USB interface: "USB", "PC" and "DEV". They are indicators to make the understanding of the
communication between PC and transmitter easier. Their functions are described below:
• "USB" LED indicates data transfer. It lights during data transfer, otherwise it is off.
• "PC" LED indicates connection between configuration program and PC. It is green only during
reading or writing to transmitter.
• "DEV" LED indicates the transmitter connection status. If it
’
s green, the connected
transmitter is detected by the USB interface. Flashing green indicates that the USB interface
is waiting for a new transmitter from the same product family, e.g. changing to a new device.
When it
´
s red no transmitter is detected by the USB interface and any sort of transmitter can
be connected to the USB interface.
2.6 Installation guide for ConSoft and USB-Interface drivers
Locate the executable setup file “ ConSoftSetup ” . Double click on the file to start the installation
process and follow the instructions on screen.
CAUTION!
The installation guide must be read prior to installation.