INOR 70C330X010, Руководство пользователя

Страница: 34 / 60

6
SERVICE
34
IPAQ C330/R330
www.inor.com 01/2019 - 4007317401 – MA IPAQ 330 R01 en
6.5.2 Disassembling and recycling
This section describes (in short) the instructions of handling and disassembling the device when
it
’
s reached EOL (end of life) or is disposed after usage. The information given is sufficient to
gather the most important parts of the device (by the end-user) which can be used for recycling.
6.5.3 Disassembling and recycling of IPAQ C330/C330X
To achieve reliability and quality performance of the product IPAQ C330/C330X is encapsulated in
casting polymer plastic resulting in that dismantling of the IPAQ C330/C330X is not possible. The
content of the IPAQ C330/C330X can be found in the following table.
The products do not contain dangerous gases or materials. If there is contamination from the
process, refer to Returning the device to the manufacturer on page 32
Type IPAQ
Model C330 / C330X
Usage Signal conditioner for resistance and voltage
Weight [g] Weight [lb]
Total 35.2 0.1
Metal parts 10.8 0.0
Ceramic fibers 0.3 0.0
Plastic parts 24.1 0.1
Material CAS Weight [g] Weight [%]
Thermoplastic NA 19.3 54.8
Stainless steel NA 5.2 14.8
Brass NA 3.5 9.9
Zinc 7440-66-6 0.3 0.9
Silicone 7440-21-3 0.8 2.3
Epoxy NA 3.6 10.2
Lead free solder NA 0.3 0.9
Nitrile NA 0.2 0.6
Copper 7440-50-8 0.9 2.6
Polyester NA 0.2 0.6
Nickel 7723-14-0 0.5 1.4
Alumina (Al2O3) 1344-28-1 0.2 0.6
Gold (Au) 7444-57-6 0.1 0.3
Barium titanat (BaTiO3) 12047-27-7 0.1 0.3