inogeni SHARE2, Руководство пользователя

Страница: 6 / 10

INOGENI SHARE2 User Guide
Version 1.1
7/22/16
6
SERIAL COMMUNICATION PROTOCOL
The device supports multiple baud rates. These can be programmed using the HID
interface.

9600 baud [default]

19200 baud

38400 baud
RJ45 cable pinout
Commands
Commands sent to the serial
interface must have the ‘<’ character at the beginning and
‘>’ character at the end. If the commands are recognized and executed properly, the
“ACK” string will be sent.
Input 1 is the HDMI stream.
Input 2 is the DVI or composite stream.
COMMAND Command description
<S1> Source 1
<S2> Source 2
<SS> Side by Side View
<BS> Big and Small View
<PPTR> Picture in Picture at top right corner
<PPTL> Picture in Picture at top left corner
<PPBR> Picture in Picture at bottom right corner
<PPBL> Picture in Picture at bottom left corner
<SW> Swap View
<SS1> Side by Side View where Input 1 is at the left side
<SS2> Side by Side View where Input 2 is at the left side
<BS1> Big and Small View where Input 1 is at the left side
<BS2> Big and Small View where Input 2 is at the left side
RX

TX

GND
+5V
NC
NC
NC
NC
1