Inocal NYS-1112, Инструкция по эксплуатации

Страница: 7 / 12

6
9
．
Place the floor board on the desired location on the sauna. note: make sure the front and back of the floor board. See FIG- 9.
10. Hold the long sitting board along the left back board ,then place it vertically into the slots, and lock them tight with screws.
Note: make sure the two legs are upright, otherwise the sitting board is instable. See FIG- 10.
FIG-9 place the floor board FIG-10 Assemble the above long sitting board
11. Hold the short sitting board along the left back board, then place it vertically into the slots, and lock them tight with screws.
Note: make sure the two legs are upright, otherwise the sitting board is instable. See FIG- 11.
FIG-11 Assembling the down short sitting board FIG-12 Assemble the left long sitting baffle
12
．
Hold the left back board and right back board along the slot, then place the long sitting baffle vertically into the slots, and
lock them tight with screws. Note: make sure the long sitting baffle uprights to long sitting board. See FIG- 12.
13
．
Hold the left back board and right back board along the slot, then place it vertically into the slots, and lock them tight with
screws. Note: make sure the long sitting baffle uprights to short sitting board .See FIG- 13. Use the same way to lack the
left little baffle, to make it upright the left long sitting sitting baffle and lock them tight. See FIG- 14.
FIG-13 Assembling right short baffle FIG-14 Assembling left short baffle