Page
| 4
PAIRING WITH YOUR innoBand APP
MAIN DASHBOARD
After the innoBand App is set up, the app pairs continuously
with the module through BLE 4.0. Once connected, the
“Connected”
message automatically pops up on the lower part
of your screen.
On this
MAIN DASHBOARD
page, you can see:
GOAL
, expressed as a percentage of target
SLEEP
, expressed as a time slept (Pink)
CALORIES
Burned (Orange)
STEPS
Taken (Blue)
DISTANCE
Traveled (Green)
You can also see your name which you’ve set (e.g. Will), and a
battery level meter. Below that, you may also flick through the
data by swiping the heading data section that displays the goal
percentage in the picture on the right.
Once the innoBand App is open, the innoBand App shows the
current paired data from the module – and the number of
Steps, Distance Travelled and Calories Burned are shown on
the dashboard. The app will also sync your data so that
GOAL
PROGRESS, INSIGHTS,
and
SLEEP PATTERN
are updated.
“SETTINGS”
To enter, click on your
‘SETTINGS’
tab on the bottom right.
Device Settings:
InApp Pairing:
Click to scan and connect to a device if
it cannot be directly connected.
LED Intensity:
Click and select on a level from 1-15.
The higher the number, the higher the LED intensity.
It is encouraged to use a lower LED intensity to save on
battery. Once you select the intensity, the sync
happens automatically. This is similar to most other
selected functions.
Wrist:
Left
/ Right
– you may choose the wrist which
you regularly wear your device. This ensures that it’s
the right way up every time.
Time Format:
In either a 12 hour or 24 hour format.
Sleep Schedule:
Set your regular sleeping and wake up
times.
