Innovative BV50 страница 10 Скачать руководство пользователя

Страница: 10 / 27

V50 Programming Mode

ation Button for at least 2 seconds while the BV50 is powered

r via

Configuration Card Programming Mode

the BV50 is powered up. If done correctly the

Current Setting Indicator Mode

ice within half a second while the BV50 is powered up. The

Encryption Key Reset Function (ccTalk)

the BV50 is programmed to ccTalk mode. It is not

ile the BV50 powered is off. Apply the power and

.2.4 HARDWARE OPTIONS

hines with a 110V supply or an MDB machine with the

nector

.3 PROTOCOLS

.3.1 SMILEY

SECURE PROTOCOL (SSP)

ed to address the problems experienced

e host

are

sured

Press and Hold the Configur

up. The Bezel LED will flash rapidly to indicate that the SSP interface is being loaded. Once

this process has finished the BV50 will reset. The BV50 will now be in Programming Mode

(SSP) and allow connection to a PC via a DA1 or DA2 adapter or connection to a DA3.

Note: This mode can only be cancelled by re-programming with a Configuration Card o

the Validator Manager program. Please ensure you are aware of all the BV50 programmed

settings before entering this mode. Failure to restore the original setting will stop the BV50

from operating in the host machine.

Press the Configuration Button once while

Bezel LED will flash every 1-second. This will allow the insertion of a Configuration Card to

change the Firmware Protocol in the BV50. (See chapter 5.1 - BV50 Configuration Card for

full details). This mode can be cancelled by again pressing the Configuration Button once.

Press the Configuration Button tw

BV50 Bezel LED will then perform a series of flashes to indicate the current settings within

the bill acceptor. (See Program Check Procedure section of Appendix D – Configuration

Cards for details on decoding the flashes)

Note: This function will only be possible if

possible to reset the key from SSP mode.

Press and hold the Configuration Button wh

keep the button pressed for several seconds. The ccTalk Encryption key will now be restored

to the default setting.

The BV50 can be used in mac

addition of in-line modules. The in-line modules connect between the BV50 16-pin con

and the host machine. It is essential that the correct interface is programmed in the BV50

for the bill acceptor to operate correctly

For the 110V option, the SP4 firmware interface

must be programmed if the bill acceptor is to be always enabled. For the MDB option, the

MDB Firmware option must be programmed. For more information on selecting the

interface, see chapter 5 - Reprogramming the BV50

SSP is a secure serial interface specifically design

by cash handling systems in gaming machines. Problems such as acceptor swapping,

reprogramming acceptors and line tapping are all addressed. This interface is

recommended for all new designs. The interface uses a master slave model, th

machine is the master and the peripherals (bill acceptor, coin acceptor or coin hopper)

the slaves. Data transfer is over a multi-drop bus using clock asynchronous serial

transmission with simple open collector drivers. The integrity of data transfers is en

through the use of 16 bit CRC checksums on all packets.

BV50 Operations Manual 10

Содержание BV50




























Результаты поиска

Содержание BV50

Отзывы:

Похожие инструкции для BV50

Бренды по названию

Популярные бренды

Innovative BV50, Руководство по эксплуатации

Результаты поиска

Содержание BV50

Отзывы:

Похожие инструкции для BV50

Бренды по названию

Популярные бренды