Innovative Technology NV9 Spectral, Быстрый старт

Страница: 23 / 27

NV9 Spectral Quick Start Guide
<< Back to Contents
Copyright © Innovative Technology Ltd 201 8
Doc:PA02093
Version: 1
Page 22 of 26
6.4.1.3 Hardware Setup
Connect the power supply to the DA2/IF17. Connect one side of the A to B USB
cable to the DA2/IF17 and the other end to the computer or laptop.
6.4.1.4 Switching to Programming Mode (SSP)
Before programming via the Validator Manager software, the NV9 Spectral needs to
be switched to its programming mode (SSP interface). Please refer to section 6 for
the procedure for doing this.
6.4.1.5 Programming the device
Once the unit has been switched to SSP, open Validator Manager and click detect
devices. This will scan all active com ports for a unit, if the NV9 Spectral fails to
connect, please ensure the correct drivers are installed and the unit is in SSP.