Innovative Technology NV11, Руководство пользователя

Страница: 15 / 167

NV11 Manual Set – Section 1 6
Copyright © Innovative Technology Ltd 2012 GA963-2
Information
Check website for options.
There are many variants of bezel and cashbox type
available for the NV11 validator. Please check the ITL
website (www.innovative-technology.co.uk) for up to
date information on the options available.
1.2 Bezel Removal and Refitting
 The bezel is
removed by pushing
the red locking arms
on both sides of the
validator upwards,
and sliding the bezel
away from the
locking arms
 Lift the bezel off
once the bezel has
been slid fully
across and is clear
of the locating pins
The bezel is refitted by pushing the bezel back onto the locating pins and sliding
backwards until all six pins are engaged in the slots. The locking arms will then spring
back and locate into the bezel.
Caution!
Check locking arms.
Always make sure that BOTH locking arms are
fully located in the bezel – trying to operate the
validator if they are not correctly located can
cause unit damage.
a. Push locking arms upwards
b. Slide bezel away from
locking arms
Locating pins
Lift upwards to remove