13
FOLDING AND LIFTING YOUR SCOOTER
SmartScoot
TM
was innovatively designed to be lightweight, foldable and easy to transport.
The SmartScoot
T
M
will fit in most
cars and all SUV’s, trucks and vans. The scooter can
be folded
and
unfolded quickly without the use of any tools.
F
O
L
D
I
T
SmartScoot
TM
offers two folding option positions to accommodate various types of spaces.
•
Position
1
allows
the
SmartScoot
TM
to
fold
down
to
its
smallest
size by
removing the seat first. This size fits into most car trunks, SU
V's, trucks and vans.
•
Position 2
allows the SmartScoot
™
to remain in one piece. This size fits into most SU
V
’s,
trucks and vans.
P
o
s
i
t
i
o
n
1
D
i
r
e
c
t
i
o
n
s
WARNING – IN THIS POSITION DO NOT LIFT THE SCOOTER BY THE STEERING COLUMN.
USE TWO HANDS TO LIFT THE SCOOTER BY THE SEAT POST AND THE CENTER BAR.
1.
Remove the seat by pulling the top security pin from the seat post and by opening the seat
clamp lever. Lift the seat out of the seat post and replace the top security pin in its original
position.
2. Using our Fold n Lock Technology
™
, fold down the front
steering column by lifting the front lever, pulling the latch
down through the notch and clamp. With one hand on the
steering column use one finger from your opposite hand
to slide the latch sideways until the steering column
releases.
3. Do NOT attempt to lift the scooter by the steering column
only. Use two hands and lift the scooter by the center bar.
There is an enclosed
Velcro strap that may be used to
secure the center bar to the steering column.
4. To remove additional weight, you can also remove the battery from the scooter.
Instructions for removing the battery from the scooter can be found in this Manual in the
Battery and Battery Charging section.
5. Once your scooter is placed in your vehicle, engage the parking brake.
P
o
s
i
t
i
o
n
2
D
i
r
e
c
t
i
o
n
s
1. Using our Fold n Lock Technology
™
, fold down the front
steering column by lifting the front lever, pulling the latch
down through the notch and clamp. With one hand on
the steering column use one finger from your opposite
hand to slide the latch sideways until the steering
column releases.
2. Lower the steering column until the handle bars rest
on the seat.
3. Lower the back rest of the seat onto the top of the handle bars, as
pictured.
4. Once your scooter is placed in your vehicle, engage the parking brake.
WARNING – IN THIS POSITION DO NOT LIFT THE SCOOTER BY THE STEERING COLUMN.
USE TWO HANDS TO LIFT THE SCOOTER BY THE SEAT POST AND THE CENTER BAR.
