1
6
1
The IMPRESSIONS
TM
pattern editor allows
the user to create any number of test
patterns with a large number of variable
settings. Create test patterns with great
precision and freedom. Verify the settings
in the preview mode. Drag & drop patterns
from one test sample to another sample.
Live vision technique over zoom overview
camera, no image stitching required.
Combine different patterns and even
different test forces in one program, and run
them fully automatically. All test points can
be identified individually or to customer
specifications. The label is shown in the test
result list and in the test results overview
and print out. An important function for
later sample analyses.
VIDEO OVERLAY GRAPHIC
PATTERN EDITOR
1
For the performance of test series for CHD/
SHD/NHD data of specimens according
to standard. The test can be started
directly from the surface view or from
the overview. Additional core points of
hardness can be defined separately for
NHD measurements. The distances of test
points are automatically set to a minimum
distance, following the standard, to assure
correct testing is conducted. Time saving
test mode “complete all indentations – then
evaluate” and “auto-stop” to complete test
series as soon as the lower hardness limit
has been reached.
CHD, SHD, NHD
2
This especially developed tool enables
you to conduct hardness testing on
welded parts or segments according
to ISO standard. Setting up the pattern
according to the requirements becomes
‘’easy-to-do’’, due to pre-set test points
in the different zones of the weld
and automatic correlation between
test points. The system will run a fully
automatic test procedure and display and
record the results accordingly.
WELD INSPECTION (ISO 9015)
3
14
A specialized software tool of IMPRESSIONS
TM
allows you to
set up and conduct fully automatic testing as per ISO 898-1
for screw thread measurement of (de)-carbonized part.
Technology that automatically or at a mouse click recognizes
the edge of your sample. This helps to determine and fix the
desired starting position for CHD or other pattern testing jobs.
This application scans the entire outline (or partial) area of a
sample. The function can be used with an objective or, ultra
fast, by using the overview zoom camera. The system scans
the entire outline defined and stores all relevant data in the
test program. Subsequently, a chosen number of test points
can be programmed into the particular program, or be
conducted at selected distances, relative to the edge. This
advanced feature enables the hardness testing procedure
to be performed completely automatic. An excellent feature
to combine with 2D or 3D hardness mapping, also known as
‘’plane hardness chart’’.
AUTOMATIC EDGE DETECTION
AUTOMATIC CONTOUR SCANNING
HARDNESS OF SCREW THREAD
DECARBONIZED ZONE (ISO-898-1)
4
5
6
Easy to operate, time reducing solutions...
15
