manualshive.com logo in svg

Innovate Motorsports LC-1, Руководство пользователя

Поделиться
Скачать
Innovate Motorsports LC-1 Скачать руководство пользователя страница 13

 

- 13 - 

If you plan to use multiple LC-1’s, change the device name to something identifying which LC-1 is 
connected where. For example LC1-Cyl1 for a LC1 connected to Cylinder 1. The device name 
can be up to 8 characters long. 
 

 

6.3 Resetting the calibration data 

 
Press the Reset Calibration button if you want to reset all calibration data in the LC-1. 
This will clear all calibration data of the LC-1. 

6.4 Updating the Firmware 

 
Click the 'Update Firmware' in the main page to upgrade to the latest 

firmware

 for the LC-1. 

Firmware for the LC-1 has the extension dld.   You can also download the latest firmware and 
software (LM Programmer and Demo) from the Innovate! Motorsports web-site at 
 
 http://www.tuneyourengine.com 
 
If your computer crashes during a firmware upgrade, the LC-1 has a recovery mechanism where 
it will be able to retry the download again and not be disabled by half loaded firmware. Switch the 
LC-1 off and on again and then try to restart the LC1 Manager software. The recovery 
mechanism is designed to be able to recover 99.9% of the time. While we don’t anticipate this 
occurring, it is possible that the LC-1 will not recover correctly and may need to be serviced at 
our factory. If you suspect this is the case, contact Innovate support. 

6.5 Programming the analog outputs  

 
Select one of the Analog output tabs. The Analog output page looks like this: 
 

 

 

This shows the analog output voltages versus Lambda for one of the two analog outputs. The 
graph display is automatically scaled to the selected voltages. For each output you can specify a 

Содержание LC-1























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды