- 12 -
6 Programming the LC-1
The LC-1 is programmable with the following functionality:
1. Change the relationship between Lambda and AFR.
2. Upgrade and change the software.
3. Change the output characteristics of the Analog outputs.
6.1 Installing the LM Programmer Software
Put the included CD in your CD-drive on your computer and follow the instructions on screen.
The Software will be installed including pre-set directories for log-data and downloaded software.
The LM Installer also puts entries for the LM Software in the Start-Menu of your computer under
the heading ‘LogWorks2’.
6.2 Hooking up the LC-1 device to the computer
Follow the instructions in chapter 6.1 to hook up the LC-1 to the computer.
Start the LM-Programmer software. The screen should look like this:
On this page you can see the software version of the LC-1 and you can change the multiplier to
calculate AFR from Lambda. A number of different multipliers are already pre-selectable but you
can change it to a custom one for the particular fuel you are using.
