INNOVASON M.A.R.S. Скачать руководство пользователя страница 47

Страница: 47 / 69

M.A.R.S. (Multitrack Audio Recording System

)

Project Management in M.A.R.S.

M.A.R.S. User Guide

47 / 69

Project Management in M.A.R.S.

This section describes how to manage Projects within M.A.R.S.
Note that only the most common functions are described. For more
details on the

MT128

recording system, please refer to the

documentation at

http://www.vb-audio.com

The MT128 Project Manager Window

This window is the starting point for all projects within M.A.R.S.:

The window is divided into two:

•

Last Projects

- shows the name of every project stored on

the M.A.R.S. hard disk.

•

Templates

- shows the name of any template projects

which have been created.

You can use the touch-screen buttons to scroll up and down the
list, choose different sort options for the list (

Sort by

), delete

(

DEL.

) or

Load

any Project or Template.

In the centre are three large touch-screen buttons:

•

Emergeny RECORD

– use this button if you do not have

time to create and name a project, and need to start
recording immediately. See Page 43.

•

Administration

– this button can be used to access

administration functions which are password protected.
These functions are not required for normal operation.

•

New Project

– use this button to create a new Project for

your recording.

Содержание M.A.R.S.






































































Результаты поиска

Содержание M.A.R.S.

Отзывы:

INNOVASON M.A.R.S., Руководство пользователя, Страница: 47 / 69

Результаты поиска

Содержание M.A.R.S.

Отзывы: