INNOVASON M.A.R.S. Скачать руководство пользователя страница 17

Страница: 17 / 69

M.A.R.S. (Multitrack Audio Recording System

)

Transport Control

M.A.R.S. User Guide

17 / 69

Transport Control

Once a project has been loaded, or a new project created,
M.A.R.S. can be controlled using the transport buttons on the
Eclipse TRANSPORT control panel, or the M.A.R.S. touch-screen
display.

The Eclipse TRANSPORT Panel

The dedicated TRANSPORT buttons may be used while viewing
any NOVA or M.A.R.S. touch-screen display:

Press Play to replay audio from the current timecode

position.

Timecode is displayed on the Eclipse front panel:

Note that this display can be switched between Internal (M.A.R.S.)
and MIDI timecode within the Nova software. See Page 66 for
details.

Whilst in Play, press the Play button again to pause the

playback.

The green LED on the button flashes when M.A.R.S. is paused.

Press Stop to stop playback.

Press Rewind or Fast Forward to run the audio backwards

or forwards at different speeds:

•

On the first press, audio runs at 0.5 x normal speed.

•

On the second press, audio runs at 1.5 x normal speed.

•

On the third press, audio runs at 2.5 x normal speed.

Note that these speeds can be adjusted from M.A.R.S. Please see
the MT128 documentation at

www.vb-audio.com

for details.

Press Play twice to cancel and return to normal playback.

For details on Recording, please see Page 29.

Содержание M.A.R.S.






































































Результаты поиска

Содержание M.A.R.S.

Отзывы:

Похожие инструкции для M.A.R.S.

Бренды по названию

Популярные бренды

INNOVASON M.A.R.S., Руководство пользователя

Результаты поиска

Содержание M.A.R.S.

Отзывы:

Похожие инструкции для M.A.R.S.

Бренды по названию

Популярные бренды