B
C
D
1)
Start the assembly with the two top
posts. Using a tape measure, identify the
correct bolts: two 2 ¾" bolts and two 3 ¼"
bolts. Use the thickest spacers, nuts, and
washers. Assemble following the directions
in the left medallion. Do not tighten yet.
2)
Assemble the two bottom posts. Using a
tape measure, identify the correct bolts:
two 2 ½" and two 3" bolts. Use the thinnest
spacers, nuts, and washers. Complete the
assembly by following the instructions in
the left medallion. Do not tighten yet.
3)
Adjust the vertical alignment of the posts by
applying a slight rotation.
4)
Slide the deck supports over the top post. Do not
secure yet.
5)
Insert the handrails over the posts. Secure it using
the screws provided.
6)
Before tightening the posts to the step as described
in steps 1 & 2, make sure that the posts are vertical
and perpendicular to the step.
I
J
ROYAL ENTRANCE II WITH DECK
MINIMUM 1"
CAUTION
To prevent pool liner puncture, keep a minimum 1" gap
between the pool liner and the rear underside of the step.
Sable
15 LBS
1)
Fill the ballast
with sand. The
approximate weight
should be 15 lbs.
Align holes.
2)
Screw the lid in place
and align the cover ribs
with the holes in the
ballast base.
3)
Fasten the cover to the
ballast base with the four
screws provided.
x4
I
4)
Slowly submerge the
step into the pool. Make
sure you do not damage
the pool liner in the
process.
5)
Slide the deck supports
to the height of the deck.
6)
Drop the ballast in the
step hole.
x8
I
B
H
E F
D
x2
x2
x2
x2
x2
x2
x4
TOP POSTS
BOTTOM POSTS
E F
x4
A
C
G
REV. 03/09/2020 PN:
PG:2
2257 route 139
Drummondville, Québec
J2A 2G2
1 year on pool step.
1 year on hardware.
MANUFACTURER WARRANTY
WWW.INNOVAPLAS.COM
1)
Affix the deck supports to the
deck with the screws supplied.
2)
Install the post covers on the
handrails.
3)
Pull the deck supports (already
fixed to the deck) upwards to create
a spring effect on the step.
4)
Fasten the supports to the rear
posts while pushing the entire step
downwards.
For the installation of the optional safety fence to
prevent swimming behind the step, visit our website:
http://innovaplas.com/instructions
J
x12
x4
I
