![Innovaphone IP64 Скачать руководство пользователя страница 18](http://html.mh-extra.com/html/innovaphone/ip64/ip64_product-data_2063528018.webp)
Product analysis: innovaphone VoIP products 2010
Copyright © 2010 by ComConsult Technologie Information GmbH
Page 14
Relay switch for highly available
ISDN trunk connection
The models IP800 and IP6000 are capable of
forwarding the ISDN trunk connection (BRI or
PRI) to a further PBX, which enables the trunk
line to still be available even in case of failure
by means of a relay switch. For this purpose,
the IP6000 has four PRI and the IP800 four
BRI interfaces. Two of these interfaces can be
used towards the trunk line and serve thus
sixty or four voice channels, respectively. The
remaining two interfaces are used to forward
onto a system which is preferably identical.
An additional failover switch is thus not neces-
sary. This so-called “Power-off loop” system,
as shown in figure 13, provides trunk access
even if the primary system completely fails.
Redundant power supply using PoE
and integrated mains adapter
The power supply is very simple. The tele-
phone systems and terminals can be oper-
ated using power over Ethernet (PoE) accor-
ding to IEEE 802.3af and need a maximum of
just 15 watts. Furthermore, all large systems,
i.e. IP800 and IP6000 have an integrated
100-240V mains adapter, which can either be
used as an alternative to the PoE connection
or to create a redundant power supply. The
smaller systems can be powered redundant-
ly using external mains adapters.
Scalable distribution
A further option to improve scalability is th-
rough outsourcing certain media services.
This enables the functions MoH, dial tone and
media relay to be distributed amongst various
physical systems. In order to further increase
these scalability effects, there is also the pos-
sibility of inter connecting several PBXs to a
logical media service unit.
Figure 14: Scalable distribution