background image

 

Operating Manual  

      IP Telephone IP230 

                   - 32 -

- 32 -

 

 

7.5.  LCD contrast   

Proceed as follows from the idle state to set the contrast on your display: 

¾

 Press the Menu key. 

¾

 Press the function key next to Phone Setup. 

¾

 With the arrow keys left and right you can determinate the contrast on a 15-stage 

scale. 

¾

 Press the Menu key to save the setting. 

 

8.

  User list / multiple registration 

Multiple registrations allow use of a telephone with multiple identities (users). Up to six 
users can be 

registered at the same time

The possibilities of this feature are varied. It is possible, for example, for an employee 
working at various locations to log on to the telephone at a different work station. It is 
also possible to implement a telephone exchange or hotline function, whereby 
employees can log on as co-users of this group. Temporary standing in for a colleague 
(their call number) is also possible via multiple registrations. 

Note: 
This feature can only be used if registration of the telephone number  is 
permitted on several telephones in the PBX component. 

Содержание IP230









































Отзывы: