Operating Manual
IP Telephone IP230
- 28 -
- 28 -
6.3. Call
waiting
1. This function allows you to control call waiting while engaged in a telephone call.
2. In the initial state, press the Menu key and the function key next to User Setup.
Use the function key next to Call waiting, to choose between the following call waiting
states:
Off
The call waiting function is switched off. The caller receives a busy
signal and the called party receives no call-waiting signal.
On - once
A call-waiting tone sounds once.
On - mute
No call-waiting tone; you only receive visual notification of a new call.
On - def.
Call waiting duration and signal are in accordance with the country-
specific standard.
Note:
You can determine the country-specific standard as
described. In the initial state, press the following keys:
- Menu key
- Function key next to Administration
- Function key next to Registration
- Function key next to Option
Use the function key next to Tones to configure the
country-specific standard for your IP telephone as desired.
6.4. Calling line identification presentation (CLIP)
This function is used to switch the calling line identification presentation feature for
outgoing calls on or off. The setting applies for all subsequent calls, in so far as settings
are not made for individual calls.
1. In the initial state, press the following keys: Menu key, function key next to User
Setup.
2. Use the function key next to Number Present to switch this feature on or off.
Tip:
Operation is faster if you assign calling line identification presentation to a
function key.
