Operating manual: innovaphone IP111, IP112, IP222 and IP232 IP phones
Page 10 / 18
In addition, information about the call that is parked there is listed. By pressing on the
favourite, a detailed view is offered, which contains a pickup function. This enables the call
to be retrieved to your own phone and accepted.
As you cannot assume that all Favourites are configured on every phone, a call can also be
picked up manually from other phones. This is realised using special number codes.
To unpark a call to your own number, use the following syntax:
#16$(1)
#16 is the number code for unparking. $1 is the parking position. The parking position is
assigned automatically and always begins with the number 0, so that in most cases dialling
#160 suffices to reach the parked call.
Unparking a call from someone else’s phone number is realised by dialling #17. The syntax
for this reads:
#17$(1)$#
whereby $(1) again relates to the parking position and $ is the phone number where the call
is currently parked. The end of the phone number is marked with a final #. This number
code unparks the call and connects it immediately.
The scenario described at the beginning can thus be solved easily if the switchboard picks
up calls using myPBX and parks them to the correct destination phone numbers.
Subscribers who are then requested over the tannoy system to answer the call can then
pick up the call from any end device by using the number code #170nnn#, nnn represents
their own extension number.
Headset operation
The headset is activated once it is plugged into the USB port. Separate installation is not
required. The headset option can be switched on under configuration, phone setup, device
