Operation instructions
I
Operation modes
• Selecting mode
Press
8
button once by once
Result:
The operation modes changed in sequence:
�
¢
[r';',NG _. �y-. F:ONLY-. HEATING
Iii
Heating mode is NOT available for cooling only air conditioner.
• FAN mode
Press
Flllt
o
button once by once
Result:
The fan speed is changed in sequence:
Iii
At
n
FAN ONLY- mode, only
n
High
n
,
n
Medium
n
and
n
Low• are available.
At
n
DRY- mode, Fan speed is set at
n
AUTO" automatically,
n
FAW button
is ineffective in this case.
• Setting temperature
Iii
Press
<i)
button once
Result:
Raise temperature setting by 1
·c
Range of available set temperature
Press
(v
button once
Resu It
:
Lower temperature setting by 1
·c
*HEATING, COOLING
DRY
FAN ONLY
16'C-30'C
-7 - 7
unable to set
-
(ff
12:0D
*Note: Heating mode is NOT available for cooling only models.
*Note: At "Dry" mode, a decrease or rise of up to re can be set
with Remote controller if you still feel uncomfortable.
• Turning on
Press
@
button.
Result:
The RUN indicator of the indoor unit lights up.
SWING, SMART, TIMER ON, TIMER
OFF,
CLOCK, SLEEP and SUPER operation modes will be specified in the following pages.
Iii ·
Changing modes during operation, sometimes the unit does not response at once. Wait 3 minutes.
•
During heating operation, air flow is not discharged at the beginning. After 2- 5 minutes, the air flow will be discharged
until temperature of indoor heat exchanger rises.
•
Wait 3 minutes before restarting the appliance.
INNOVAIR DC INVERTER QUANTUM
REMOTE CONTROL MANUAL
w w w . i n n o v a i r . c o m
3
