D. Large spoiler
Check that you have all the parts for this model BEFORE assembling your product.
No tools required.
Parts List
F. Padded seat
E. Baby walker frame
G. Electronic play tray
1
Before using, check that the product and all of its components have not been
damaged during transportation. Check regularly that the product is not broken or
damaged. If the product is broken or damaged, keep out of reach of children.
The product must only be assembled by an adult. For the correct assembly of the
product, please refer to the following instructions.
STAIR HAZARD: Avoid serious injury or death. Block stairs/
step securely before using walker even when using
parking brake.
The child will be able to reach further and move rapidly when in the w alking frame.
Prevent access to stairs, steps and uneven surfaces, slopes or unstable floors,
swimming pools or other sources of water. Only use the baby walker frame on
flat and stable surfaces.
Never leave child unattended. Always keep child in view
while in walker.
Guard all fires, heating and cooking appliances.
Remove hot liquids, electrical flexes and other potential hazards from reach.
Prevent collisions with glass in doors, windows and furniture.
Do not use the baby walking frame if any components are broken or missing.
This baby walking frame should be used only for short periods of time(e.g.20 min).
This baby walking frame is intended to be used by children who can sit unaided,
approximately from 6 months. It is not intended for children weighing more than 12kg.
Do not use replacement parts other than those approved by the manufacturer
or distributor.
Before using, remove and dispose of any plastic bags and any other packaging(e. g
fasteners, fixing ties, etc. ) and keep them out of reach of children.
•
•
•
•
•
•
•
•
•
•
•
Read the instructions carefully before use and keep them for future reference.
The child may be hurt if you do not follow these instructions.
B. rear fix wheels
C. safe rubbers
A. wheels
step 3
step 2
step 1
ASSEMBLY
1. Turn the baby walker frame upside down. Fix the wheels in the appropriate housings. Ensure that
the wheels are firmly pushed all the way into the housing on the down base of the walker.
2. Fix the rear fix wheels in the appropriate housings. Ensure that the wheels are firmly pushed all the
way into the housing on the down base of the walker.
3. Fix the safe rubbers in the appropriate housings. Ensure that the safe rubbers are firmly pushed all
the way into the housing on the down base of the walker.
Assembling Procedures
2
Assembling Procedures
Processo di Montaggio
1. Capovolga la struttura del girello . Inserisca le ruote nei loro spazi corrispondenti. Si assicuri che le ruote siano
ben collocate nei loro spazi corrispondenti nella parte inferiore della base del girello.
2. Inserisca le ruote porteriori nei loro spazi corrispondenti. Si assicuri che le ruote siano ben collocate nei loro
spazi nella parte inferiore della base del girello.
3. Inserisca i freni di gomma nel loro spazio corrispondente. Si assicuri che i freni di gomma siano ben collocati
in tutta la base del girello, nello spazio corrispondente.
Passo 1
Passo 2
Passo 3
