MU8016-012ENG rev02
7
o) The maximum force applied by the system to the structure is, a vertical force of 13kN ac-
cording to EN362, EN795: 2012 CE and TS16415: 2013 on the anchor to which the system
is attached.
WARNING:
The system must be appropriately checked, for example, by calculations or
tests.
WARNING:
The use of a base, structural anchor or fastener, if one exists, must be taken
into account when calculating the amount of force supported by the anchor during strength
and integrity testing.
p) A rescue plan shall be put in place in order to account for all likely emergencies that could
occur while working.
WARNING:
Any modification or addition to the equipment cannot be done without the prior
written consent of the manufacturer, and any repairs must be undertaken in accordance
with the manufacturer’s procedures.
WARNING:
It is established and agreed that the equipment (system) is reserved for a
maximum of two people.
WARNING:
It is important to place the XTIRPA system on a hard and level surface. Do not
use the XTIRPA system on a soft surface, including, but not limited to, sand, grass, gravel
and rocks. If you have any questions about use or maintenance or whether the XTIRPA
system is appropriate for your job, please contact the manufacturer PSP INNOVA INC.
WARNING:
For safety reasons, make sure when using the anti-drop system that you have
enough space under the user, so as to avoid injury. If a fall occurs, there should be enough
space to avoid a collision with the ground or any obstacle. See the diagram in Section 8
for calculating this distance.
