Innova IT9600, Руководство пользователя

Страница: 4 / 16

Step 1
– Base Frame Assembly
NOTE: Be sure to use the Bottom Tube (1) with the warning label on the FRONT of
the inversion table (9R&9L) for visibility and to help ensure that all users are aware
and take proper precautions.
Lay the Right Base Frame (8R&9R) and
the Left Base Frame (8L&9L) on the floor
with the Connecting Brackets (11R&11L)
facing each other. Make sure the
indented holes on the Bottom Tubes (1)
are facing downward and attach the
Bottom Tube (1) with the warning label to
the Front Base Frame (9R&9L) using 2
Bolts (32). Attach the other Bottom Tube
(1) to the Rear Base Frame (8R&8L)
using 2 Bolts (32).
DO NOT tighten Bolts (32) until the
Cross Bar (12) is attached.
Make sure the Rubber Stopper (34) on
the Cross Bar (12) is facing out and
attach the Cross Bar (12) to the Front
Base Frame (9R&9L) using 4 Bolts (20)
and 2 Metal Support Plates (54), 4
Washers (19) and 4 Lock Nuts (21).
NOW Tighten all Bolts (32&20).
Insert 4 Base Frame End Caps (31) into
both Bottom Tubes (1).
Unfold the Front Base Frame (9R&9L)
from the Rear Base Frame (8R&8L) and
let it stand on the floor.
4
Right
Left
! W
arn
ing
Rear
Front
11R&11L
facing each other
Right
Left
! W
arn
ing
Front
Rear
Rubber Stopper
is facing out
Indented
hole
PLEASE NOTE:
RIGHT (R) Indicates right side while using the
inversion table, not facing it.
LEFT (L) Indicates left side while using the
inversion table, not facing it.
NUTS (21) are Lock Nuts . To tighten, you
need two wrenches.