Innova Srl
Page 28
N420741A_manuale-HRC+2022 - rev.01 _EN
.docx
6.1.3
DIPSWITCH SETTINGS
In the upper part of the board there are 4 dip-switches for the various operating configurations of the unit;
It is essential to set the dip-switches correctly; the indications for the various methods of use are then repeated;
DIPSWITCH FUNCTIONS
DIP SWITCH A
ON
OFF
Activation of CHILLER contact preheating coil
Deactivation of the CHILLER contact preheating battery
DIP SWITCH B
ON
OFF
- Enable unit with modulating battery control
- Disabling of units with modulating battery control
NB: The unit model is factory preset in OFF; do not change the setting to avoid unit malfunctions;
DIP SWITCH CD
The combination of these Dip Switches decides the functioning of the humidity and air quality sensors
ON OFF
OFF ON
Ambient humidity control
Quality control of the environment
OR NOT
Active ambient humidity and ambient air quality controls
The maximum value between the two calculated is used;
