Using the Scan Tool
VIEWING OEM ENHANCED DTCs
29
If the definition for the cur-
rently displayed code is not
available, an advisory mes-
sage shows.
I/M MONITOR STATUS
icons are not displayed
when viewing enhanced
DTCs.
In the case of long code definitions, a small arrow is
shown in the upper/lower right-hand corner of the code
display area to indicate the presence of additional
information.
If no codes are present, the message “No OEM Enhanced DTC’s
are presently stored in the vehicle’s computer” shows. Press
SYSTEM MENU
to return to the System Menu.
3.
If more than one code was retrieved press
DTC/FF
, as necessary,
to display additional codes one at a time.
Whenever the Scroll function is used to view additional codes,
the Scan Tool’s communication link with the vehicle’s computer
disconnects. To re-establish communication, press
LINK
again.
4.
When the last retrieved DTC has been displayed and
DTC/FF
is
pressed, the Scan Tool returns to the “Priority” Code.
To exit the enhanced mode, press
SYSTEM MENU
to return
to the System Menu. Select
Global OBD
, then press
ENTER
to return to the Global OBD2 mode.
VIEWING OEM ENHANCED DTCs (Ford/Mazda only)
Mazda Enhanced DTCs are available for
Mazda-branded
Ford vehicles only
.
When
Ford
OEM Enhanced
is chosen from
the System Menu, the Ford Enhanced
menu displays. You may view OEM DTCs
for either the “Continuous Memory Test”,
“KOEO (Key On Engine Off) Test” or
“KOER (Key On Engine Running) Test.”
1.
Select the desired option, then press
ENTER
.
If
KOER
is selected, an advisory message shows.
- Start and warm the engine to normal operating temperature,
then press
ENTER
. Proceed to step
3
.
2.
If
KOEO
or
Continuous Memory
is selected, an “instructional”
message shows.
Turn the ignition OFF, then back ON. Press
ENTER
.
Proceed to step
3
.