5
EN
SANDWICH-13 / 180626 / www.innotech.at
3
SAFETY INSTRUCTIONS
3.3
FOR USERS: FOR SAFE USE
-
All stainless steel bolts must be greased with a suitable lubricant before installation
(included: Weicon AntiSeize ASW 10000 or equivalent quality)
-
Ensure that stainless steel does NOT come into contact with swarf or steel tools.
This may lead to corrosion.
-
The fitters must ensure that the substructure is suitable for fastening the safety
system. If in doubt, consult a structural engineer.
-
Document the professional attachment of the safety system to the building structure
with dowel logs and photos of each fitting situation.
If uncertainties arise during installation, it is imperative that you contact
the manufacturer.
-
The minimum free space necessary under the edge is calculated as follows:
Manufacturer's specification of the personal protective equipment used, including
deflection of the cable + body 1 m safety margin.
-
Fastening on the safety system always occurs through the rotating anchorage eye
with a carabiner and must be used with personal protective equipment in accordance
with EN 361 (safety harness) and EN 363 (fall arrest system).
-
For horizontal use, only lanyards may be used that are suited for this purpose and
have been tested for the respective edges (sharp edges, trapezoidal sheeting, steel
girders, concrete, etc.). The correct use of the lanyard limits the maximum force
on the user to 6 kN during a fall arrest event.
-
Correct use of the individual elements including personal protective equipment
must be ensured, because otherwise the safe functioning of the safety system
is NOT guaranteed.
-
Do NOT use safety systems if wind speeds are higher than normal.
-
Following strong storms, inspect the metal roof system (substructure) before
continuing to use the safety system.
-
If used on sloping roofs, roof avalanches (ice, snow) must be avoided by means
of suitable devices to intercept snow.
-
The safety system must NOT be used by children and pregnant women.
3.2
FOR INSTALLERS: FOR SAFE ASSEMBLY
Содержание SANDWICH-13
Страница 13: ...13 EN SANDWICH 13 180626 www innotech at 2 3 12 INSTALLATION 4 2x 2x...
Страница 14: ...14 SANDWICH 13 180626 www innotech at EN 5 12 INSTALLATION 0 5 mm 2mm 12 2 INNOTECH AIO SANDWICH 13 1 2 mm 2x...
Страница 20: ...20 SANDWICH 13 180626 www innotech at EN 12 INSTALLATION 3 4 AF 10 mm DONE 0 6 mm...