Page 4 of 12
Edition 02/25/2016
INNOTECH
EAP QUAD-11
INNO
TECH
QUADRAT-11
APPLICATION
As anchorage point for
3 people
(including 1 person for first-aid administration) with personal
protective equipment EN 361 (safety harness) and EN 363 (fall arrest system).
STANDARDS
INNOTECH QUADRAT-11 has been tested and certified for installation on roofs in accordance with
EN 795 A.
The inspection was executed both statically and dynamically on the original substrate.
MATERIAL
INNOTECH QUADRAT-11 is made of stainless steel, quality 1.4301
SIGNS AND MARKINGS
-
Type designation:
INNOTECH QUADRAT-11
-
Number(s) of the applicable standard(s):
EN 795:2012 A
-
Name or logo of the manufacturer/reseller:
INNOTECH
-
Manufacturer's serial number and year of manufacture:
xxxx / 20xx
-
Signs stating that the instructions specified in
the manual must be followed:
DIMENSIONS
INNOTECH QUADRAT-11
∅
16mm
Support heights: 200, 300, 400, 500, 600 mm
special lengths on request
Base plate dimensions: exterior dimensions 235 x 235
and 4 mm thickness
ATTENTION:
If the INNOTECH QUADRAT-11 POST is used as end point
or corner point for horizontal lifeline systems, then it is
indeed suitable for absorbing high arrest forces in the
event of a fall, however the basic stability of
∅
16 mm
posts is quite low; with posts exceeding 300 mm in height deformations can occur. Consequently
the roof sealing must be designed in such a manner that it satisfies these requirements.
DEVELOPMENT
INNO
TECH
Arbeitsschutz GmbH
A-4656 Kirchham, Laizing 10
w w w . i n n o t e c h – s a f e t y . e u
