Innoquest GoTow 36520, Руководство по эксплуатации продукта

Страница: 6 / 12

ASSEMBLY:
Before Starting
INSTRUCTIONS IN ENGLISH
| GOTOW DRILL-POWERED TOW BAR
Step 1 – Attach the operator platform
Step 2 – Attach the tow arm
Step 3 – Attach drill & adjust handlebars
Attach the operator platform to the drive head with (4) included 5/16-18 x 7/8 hex bolts (fully
tighten).
Attach tow arm to drive head with (6) included 5/16-18 x 7/8 hex bolts (
do NOT tighten until Step 8
).
Loosen all three 5/16-18 x 7/8 hex bolts and insert handle bars to full depth. Insert drive shaft to
full depth in drill chuck and tighten firmly. Finally, slide handle bars up in the channel until they
are snug against the drill handle then tighten bolts firmly.
Unpack and inspect components:
Tow Arm, Operator Platform, Handle Bars.
Drive Head, 5/16-18 x 7/8 Hex Bolts (10) Tools needed:
½” Wrench, Tape Measure
GoTow Drill-Powered Tow Bar Item #36520 4
DRIVE SHAFT