background image

Installation

Before Starting the Installation:

Please wait about 5 to 6 seconds after you insert power cable, and wait for 

LCD to show information.

1.  Make sure your broadband Internet access device is powered on 

and your connection is up. (See your service provider’s documen-

tation).

2.   Connect included AC/DC power adapter to the electrical outlet 

and its cable to the DC IN port on the back of the IP Phone (see 

Figure 1).

3.    Connect one end of the included Ethernet cable to the WAN 

port on the IP Phone (see Figure 2) and the other end of the 

Ethernet cable to the Ethernet port on your broadband Inter-

net access device (e.g., cable modem, ADSL modem, wireless 

modem, etc).

NOTE: If you also want to use your PC to access the same broadband 

IP network, connect one end of your PC’s Ethernet cable to the LAN 

port on the IP Phone and the other end of the Ethernet cable to the 

Ethernet connector on the back of your PC.

Operating the IP Phone

INITIALIZATION

•  When the unit is powered on, the display will show the following 

message for a few seconds:

Initializing... 
Acquiring IP...

•  When the unit has successfully connected to the network, you 

will see the date and time displayed:

Jan 20 2:20AM

IP: 172.16.0.1

MAKING CALLS

•  Pick up the handset or press the SPEAKER key

•  You should hear a dial-tone and see the following on the display 

when dialing:

Calling

14084325400

The number you dialed will be displayed.

•  When your call is completed, simply hang up the handset and/or 

click off the SPEAKER key

CALLER ID SERVICE

Your unit is compatible with Caller ID service offered by your service 

provider.  If you have subscribed to this feature, the calling party’s 

information will be displayed after the first two rings.

If the calling party has blocked its Caller ID, then the display will 

show Anonymous Caller.

CALL LOGS

In conjunction with the Caller ID feature, your unit stores logs for up 

to 10 calls, including the time and date.

The Call Log information is sorted by the most recent to the oldest 

call.  When the log has reached its maximum capacity, the oldest call 

will be deleted as each new call is recorded.

If you have missed any calls while you were away, then your unit 

will provide a visual indication:

3 missed calls  

Enter for log

If you press Enter you will be immediately taken to the Missed Calls 

log, where you can review the calls that you missed while you were 

away.

 1.John Doe  
14085551212  

Figure 1

Figure 2

To view additional log entries, simply press the  << or >> buttons on 

your unit.

Note:  If you power off your unit, then all call logs will be cleared.

USING THE PHONEBOOK

The Phonebook feature allows you to store up to 10 contacts’ names 

and phone numbers.

ADDING A CONTACT

You can add contacts to your phonebook by doing the following:

1.  Press the DIRECTORY button

2.  Select 1. Add, by pressing Enter again

3.  Enter the contact’s name and press the SAVE soft key

4.  Enter a phone number for the contact and press DOWN

5.  The new contact is now stored in your phonebook.

To enter characters and symbols while in the phonebook, simply 

use the dialing pad on your unit.  The following table describes the 

characters available with each press of the keypad:

Key

Characters

Key

Characters

1

@ & ‘ ( ) , - . / 1

7

P Q R S p q r s 7

2

A B C a b c 2

8

T U V t u v 8

3

D E F d e f 3

9

W X Y Z w x y z 9

4

G H I g h i 4

0

0

5

J K L j k l 5

*

*

6

M N O m n o 6

#

#

When entering characters, you may press DELETE if you need to 

erase a mistake. Press >> to enter a space.

Отзывы: