background image

InnoMedia 

IP Phone 6308SL 

Quick Install Guide

Introduction

The InnoMedia IP Phone 6308SL is an integrated device providing 

telephony service over a broadband network.  This guide will help 

you to quickly install and configure your unit so that you can start 

placing calls right away.

Package Contents         

The InnoMedia IP Phone 6308SL  comes with the following items:

1 IP Phone 6308SL

1 AC/DC Power Adapter

1 Ethernet Cable   

1 Quick Install Guide

Note: Make sure you have received above items in the Package.  If 

anything is missing, please contact your network service provider.

Appendix A. LED Status Summary

LED

Blinking State

Description

Any LINE 

Key

Off

The line has not been enabled or is not setup

Green Steady

The line has successfully registered to the server and 

is available for use

Amber Steady

The line is not registered and is not available for use

Green Blinking (.5 sec 

ON, .5 sec OFF)

The line is ringing with an incoming call

Green Blinking (1 sec 

ON, 1 sec OFF)

The line has a voicemail message waiting

Red Steady

The line is being actively used

Red Blinking (.5 sec 

ON, .5 sec OFF)

The line is on HOLD

SPEAKER

Green Steady

Speakerphone is in use

Off

Speakerphone is not in use

VMWI

Red Steady

New voicemail is waiting

Off

No new voicemail

Specifications

Network Interface

Dual 10/100 Base-T  Uplink/Downlink
PoE 802.11af

Display Interface

4 line character-based LCD Display  
Visual Message Waiting Indicator (VMWI)

Dimension

2.14 in (H) x 6.10 in (W) x 8.12 in (D)
72 mm x 180 mm x 220 mm

Power Supply

Input: AC 100-240V, 1.0A max., 50-60Hz

Output: DC 12V, 1.0A

Power Consumption

Talk: DC 12V @ 0.26Amps (3.12W)

Idle: DC 12V @ 0.18 Amps (2.16W)

Weight

Weight: 1.64 lbs (744g)

www.innomedia.com

© 2008 InnoMedia, Inc. All rights reserved. InnoMedia and the InnoMedia logo are trademarks of InnoMedia, Inc. All other 

brand and product names may be trademarks of their respective companies.

Version 1.2; 03-09

FINDING A CONTACT

You can view the contents of the phonebook , and also dial a con-

tact directly from the phonebook.

1.  Press the DIRECTORY button

2.  Select 3. Browse, then press Enter

3.  Press the >> button to browse the phonebook entries

4.  Once you have found the contact you wish to call, press CALL to 

connect to them

Troubleshooting

Problem: 

I have no dial tone

Solution:

Your unit may not have successfully connected to the network.

1.  Unplug the power of the unit

2.  Check to make sure you connected the Ethernet cable from 

your broadband modem to the WAN port on the back of the IP 

Phone

3.  Plug in the power of the unit and wait for a few seconds while 

it initializes

4.  When LED light stays solid green, you may try again to make a 

phone call

Please contact the service provider if you are still having a problem 

receiving dialtone.

*Picture shown is the IP Phone 6308SL

Отзывы: